Custom RS Sails Carbon Fiber Tow NP17 Windsurfing Mast
|
|
NP17 Windsurfing Mast Designed to fit Neil Pryde EVO/RS Sails
The carbon fiber winding forming process is a forming process in which the winding machine uses a computer preset program to accurately compile a group of yarns on a pre-designed mold to form a composite material product with a higher degree of mechanization. The advantage of the winding process is that the pretension of the yarn can be maintained throughout the molding process, so that all carbon fibers can share the stress of the product at the same time, thereby better exerting the performance of this new material. Another advantage of the winding process is that it can match different resin systems for carbon fiber according to the requirements of special working conditions, so as to meet some special requirements such as flame retardant, high temperature resistance and strong corrosion resistance. The mechanized production method can improve the production efficiency and reduce the production cost while ensuring the stable product quality. According to the needs of different customers, we design different layers and winding methods to make your pipe fittings not only have super performance but also have a unique appearance. If you refuse to become mediocre and monotonous, please choose winding, because winding makes your products vivid!
There are 2 kinds of winding process as below:
The main raw material for making carbon fiber tubes by dry winding is carbon fiber prepreg tow. The raw material supplier will accurately control the resin content of the tow when making the prepreg tow, so the quality stability of the manufactured product is relatively easy control. This production method has high efficiency, and the production environment is clean and hygienic, but the raw material price is higher and the storage conditions are higher.
This method is mainly to soak the carbon fiber filament tow in the resin first, then wind the soaked tow continuously on a stainless-steel core mold through the control of tension to make a core mold tube. This method is the mainstream way of making high-performance carbon fiber tubes. The main advantages are: economical process, which can effectively reduce production costs; the internal sealing effect of the product is good, the internal air is extruded, and the porosity of the product is greatly reduced; the fiber layout is balanced Smooth; resin lubricated, can reduce carbon fiber wear during production; production speed is fast. The disadvantages are: there is a certain waste of resin raw materials; the accuracy of the resin content is difficult to control accurately; the environmental friendliness is low.
Compression test To simulate the force situation when the sail is assembled, fix the two ends and squeeze the mast. After reaching the corresponding curve of the sail, continue to increase the load until the mast breaks. Get the damage load, compared with the corresponding standard. Bending test To get the curvature, support the mast at both ends and hang with a
weight of 30 kgs in the middle, then bend is tested in the middle
and the other six positions which are equally distributed. Obtain
the IMCS value of the mast and draw a standard bending curve for
easy comparison with the sail curve.
carbon/aramid/UHMWPE fibers and relative products;
which offer good prices and stable good quality;
the products to client and help them to find a total solution.
|
| Product Tags: NP17 Windsurfing Mast Carbon Fiber Tow Windsurfing Mast RS Sails Windsurfing Mast |
|
Custom RS Sails Carbon Fiber Tow NP17 Windsurfing Mast |
|
1.0mm 3K Carbon Fiber Hybrid Winding SUP Paddle Shaft |
|
Anti Corrosion Tow Preg Sailing Boat Carbon Fiber Mast |
|
FLX100 FLX70 FLX40 RDM SDM Carbon Fiber Windsurfing Mast |
|
3K Windsurfing Mast Filament Wound Carbon Fiber Tube |
|
Round / Rectangular / Oval / Square Carbon Fiber Pultrusion With Matte Glossy |