Solar Power Panels Home Use Grade C Solar PV Monocrystalline solar
panels made ELECTRICAL DATA (STC) MODEL | MS-325P | MS-330P | MS-335P | MS-340P | MS-345P | MS-350P | MS-355P | MS-360P | Peak Power Watts-Pmax (Wp) | 325 | 330 | 335 | 340 | 345 | 350 | 355 | 360 | Power output Tolerance-Pmax (W) | 0~5 | 0~5 | 0~5 | 0~5 | 0~5 | 0~5 | 0~5 | 0~5 | Open Circuit Voltage-Voc (V) | 46.2 | 46.4 | 46.8 | 46.9 | 47.3 | 47.4 | 47.8 | 48.0 | Maximum Power Voltage-Vmpp (V) | 37.7 | 37.9 | 38.2 | 38.3 | 38.6 | 38.7 | 39.0 | 39.2 | Maximum Power Current-Impp (A) | 8.62 | 8.71 | 8.77 | 8.88 | 8.94 | 9.04 | 9.10 | 9.18 | Short Circuit Current-Isc (A) | 9.22 | 9.32 | 9.38 | 9.50 | 9.56 | 9.68 | 9.74 | 9.83 |
STC (Standard Test Environment): Irradiance 1000W/m2, Battery Temperature 25℃, Spectrum AM1.5 NOCT (Nominal Operating Temperature Condition of Cells): Irradiance 800W/m2, Ambient Temperature 20℃, Spectrum AM1.5, Wind
Speed 1m/s. |
MECHANICAL DATA Solar Cell | 156.75x156.75mm Mono-crystalline | No. of cells | 72pcs | Glass | 3.2mm Ultra clear cobwebbing tempered glass | EVA | White | Frame | Sliver Anodized Aluminum Alloy | J-BOX | IP67 or IP68 rated | Module Dimension | 1950x986x4.5mm (Frameless),1960x992x40mm | Weight | 21kg | Connector | MC4 |
TEMPERATURE RATINGS Operational Temperature | -30℃- +80℃ | NOCT (Nominal Operating Cell Temperature | 45±2℃ | Temperature coe cient of Pmax | -0.45%/℃ | Temperature Coe cient of Voc | 0.37%/℃ | Temperature Coe cient of Isc | 0.08%/℃ |
MAXIMUM RATINGS Maximum System Voltage | 1000VDC | Maximum Hail Testing | 35mm Diameter,Velocity 27m/s | Front Snow Load | 5400Mpa | Rear Wind Load | 2400Mpa |
WARRANTY Product Quality Warranty | 10 Years | Linear Performance Warranty | ≥25 Years |
PACKAGING CONFIGURATION Module per box | 27pcs | 40' Container | 648pcs |
The electrical performance in this catalog not refers to one
module, neither act as a commitment content of a contract. The
electrical data is just for reference to di"erent models and
Leadsun does not guarantee its 100% accuracy. Based on the requirements for continuous innovation, R&D and
product improvement, Leadsun reserves the right to adjust the
information in this technical parameter file at any time without
prior notice. |
Photovoltaic power generation system (PV System) is a power
generation system that converts solar energy into electrical
energy, and takes advantage of photovoltaic effect. Photovoltaic
power generation system is divided into independent solar
photovoltaic power generation system, grid connected solar
photovoltaic power generation system and distributed solar
photovoltaic power generation system. |
Ground power stations are usually large in scale, mostly in desert,
grassland and other areas, making full use of the abundant and
relatively stable solar energy resources in the desert areas to
build large photovoltaic power stations, and access the high
voltage transmission system to supply long distance load. |
The distributed power station is mainly built on the surface of the
building to solve the problem of power consumption in the near
future. The power supply is on the user side, generating
electricity to supply local load, which can effectively reduce the
dependence on power supply and reduce line loss. |
The new form of photovoltaic power generation is complementary to
light and light, complementary to agriculture and light, the upper
layer is used for photovoltaic power generation, and the lower
layer is used for aquaculture or crop cultivation. As long as the
PV modules are placed on the top of the water surface and along the
fish ponds, there is no need to occupy valuable agricultural,
industrial and residential land. |
1. distributed rooftop PV power plant investment For excellent industrial and commercial users, a large area of
available roofs and large energy consumption can be used to reduce
the amount of power generation in distributed power stations. At
the same time, credit conditions are better. Morgan Sun Sheng will
rent its roof for a distributed power station investment. 2. EPC Engineering Service For owners of independent investment projects, Morgan will provide
design, procurement, construction through-train services. 3. advisory services For owners who are intending to build a distributed power station,
Morgan will provide advisory services for the project, including
project filing, power grid access, construction and operation and
maintenance. 4. power station operation and maintenance In order to reduce the pressure and inconvenience of individual
owner maintenance, Morgan Sun Sheng will focus on providing
operation and maintenance services for photovoltaic power stations
in the area. The engineers with rich experience in operation and
maintenance will manage multiple distributed power stations at the
same time, and have high efficiency. At the same time, the owner of
the building can enter the stock market, set up an independent
legal person operation on the specific project, introduce the
capital of different channels, supplement the debt funds such as
bank loan, financing lease and so on, to solve the problem of
project investment funds. |
|
