31 - 40 of 40
modbus protocol four electrode conductivity sensor
Selling leads
|
...Sensor Differential Amplifier KPH601 Online PH Sensor Signal Output: RS-485 (Modbus/RTU Protocol) 1.Calibration Both the zero point, the point ...
2026-06-11 14:05:04
|
|
...Sensor is designed for convenience. It comes pre - calibrated at the factory with built - in calibration parameters, allowing for direct installati...
2026-06-22 00:21:20
|
|
...its slope. In addition to the two-point calibration, other methods exist which can monitor the performance of the electrode. For instance, a so ...
2026-06-11 14:05:04
|
|
...connector, calibration data is stored in the sensor, can be calibrated and replaced in the field. You can connect up to 6 water quality digital ...
2026-06-11 14:05:04
|
|
...Sensor ORP Sensor RS485 Output without Display ORP Electrode 1. Application KWS-550 can be used for environmental water quality monitoring, acid...
2026-06-22 00:21:20
|
|
... obstacle avoidance. Technical Specifications Product name Four-Beam Underwater Obstacle Avoidance Sensor Blind zone 15cm Measurement accuracy ±0.5...
2026-06-11 14:05:04
|
|
... can be measured simultaneously. The sensor types can be selected such as dissolved oxygen, pH, ORP, conductivity/salinity, ammonia nitrogen, ...
2026-06-11 14:05:04
|
|
...Sensor Signal Output: RS-485 (Modbus/RTU Protocol) 1. Temperature compensation The pH range (0-14) is determined through the ion product of the ...
2026-06-11 14:05:04
|
|
... may be checked, cleaned, calibrated and replaced without interrupting the process. When installed in a pipe-line, no bypass valves are necessary. ...
2026-06-11 14:05:04
|
|
..., industrial production process, it can meet the requirements of online ORP measurement for most industrial applications. 2. Feature Signal output: ...
2026-06-11 14:05:04
|