The KLSA-PN Laser Ranging Sensor For Topographic Mapping

Introduction

Laser distance sensor is a precision instrument that uses laser technology to achieve non-contact distance measurement. It determines the distance, position or displacement of the target object by emitting laser and analyzing the reflected signal. Its core advantages are high precision, long distance, fast response and anti-interference ability. It is widely used in industrial automation, intelligent equipment, surveying and remote sensing, consumer electronics and other fields.

Features

• The device can be used as a laser distance sensor.
• The laser distance sensor can measure distances between 0.03 and 22 m.
• The device has a background suppression of 22 m.
• The measured values are shown in a 4-digit display.
• RS485 signal and analog 4-20mA signal can be output.
• The customer must limit the distance between the sensor and the background to no more than 22 m. Otherwise the measured values may be inaccurate.

Technical Specifications

Safety Instructions

• Please read this document before installing the device. Make sure that the product is suitable for your application and is not subject to any restrictions.
• Improper use or use of the device for purposes other than those specified may cause the device to malfunction or lead to unexpected situations during use. Therefore, only qualified personnel authorized by the device operator may perform installation, electrical connection, settings, operation and maintenance of the device.
• In the event of a malfunction in the device, please contact the manufacturer. We reject any liability and warranty claims arising from unauthorized modifications and/or alterations to the device.

Function

Hysteresis function output

[Hno][Hnc]. Set a switch point. If the measured value changes around the sensing range, the hysteresis function can keep the output switch state stable

Window function output

[Fno][Fnc]. Set two switch points for near and far. Use the window function to monitor the defined allowable range.

Turn off the laser

The sensor can set the red dot to indicate the laser on and off by pressing the button. It does not affect the normal distance measurement.

Installation

Installation conditions

► Install the device so that the object to be measured is within the measuring range of 0.03...22 m.

►The sensor has a fixed accuracy range of 22 m. Do not measure objects within a range > 22 m.

►The customer should also avoid reflective objects in the direct optical path of the sensor within a range > 22 m. Otherwise, the measured values may be inaccurate..

Install accessories

Dimension

Cable Definition

Order Model Table