Revolutionary Clamp-on Ultrasonic Flowmeter Power Supply 10-24V VDC

Introduction

The KUF100 ultrasonic flowmeter operates using the time difference method. It sends and receives ultrasonic signals through the fluid and calculates the flow rate by measuring the difference in the propagation time of these signals in the downstream and upstream directions. This method enables precise measurement of fluids with suspended particles or bubbles and is not influenced by the fluid's conductivity.

Feature

• Simple installation and convenient operation. There is no need to break the pipe or stop for a long time for construction, and the installation can be easily completed within a few minutes.
• It adopts a new clamp-on design without touching the measuring medium. It can avoid pressure loss and medium pollution caused by traditional flowmeters.
• A variety of modes can be set, flexible and diverse.
• A set of machines can be used for all diameters within the measuring range, and is suitable for various metal pipes and resin pipes.
• Super large screen display. The display content is diverse and man-machine friendly.
• It can be selected as an ultrasonic cold (heat) meter to realize the monitoring and measurement of energy consumption.

Technical Specifications

Flow Range

Tip: The inner diameter of the smallest measurable pipe section is greater than or equal to 12mm.

Dimensions

DN15-40

DN50-65

Ultrasonic Cold (Heat) Meter

Ordering Information

Example:

• KUF100-S-1-C2-AM

ultrasonic flowmeter, range DN15-DN40, temp. range 0-65℃, with 4-20mA and RS485 output, standard cable length 2m.

• KUF100-S-2-C2U-AM-P

ultrasonic cold (hot) meter, range DN15-DN40, temp. range 0-115℃, with 4-20mA and RS485 output, standard cable length 2m; with a pair of PT1000 temperature sensors; one end of the temperature sensor is on the meter, and the other end of the cable is standard 9m

Appendix:KUF100 Clamp On Ultrasonic Flow Meter Datasheet_v1...