Downhole Retrievable Bridge Plug Mechanical Setting 5 1/2 " x 5000
psi RBP
Introudction of Retrievable Bridge Plug
The Model 3L bridge plug is composed
with packer-type sealing elements,mechanical slips, and
a large-area bypass, it is a kind of the retrievable bridge
plug used in well completion and well testing
service. The sealing elements of the retrievable bridge plug
are less susceptible to damage while running in the hole because
the sealing elements will not in contact with the casing
The bridge plug is retrieved when the tubing is lowered and the
overshot engages the lugs on the plug-retrieving head. Right-hand
torque is applied and the tubing is pulled up.
Specification of the 5 1/2" retrievable bridge plug
Casing
Size
/in. | Bridge Plug
Main Body OD / in. | End
Connections | Nominal
Casing Weight
lb/ft | Minimum
Casing ID
/in. | Maximum
Casing ID
/in. | Length
/ in. | Tensile
Rating /lb | Working
Pressure
/psi |
| 5 1/2 | 4.6 | 2 7/8 in. 8 Rd EU × 2 3/8 in. 8 Rd EU | 13 - 20 | 4.778 | 5.044 | 89.43 | 65,200 | 10,000 |
| 4.35 | 2 7/8 in. 8 Rd EU × 2 3/8 in. 8 Rd EU | 20 - 23 | 4.56 | 4.778 | 89.43 | 65,200 | 10,000 |
Detailed specification of the retrievable bridge 5 1/2" x 5000 psi
working pressure
| 1 | Description : BRIDGE PLUG, RETRIEVABLE, MECHANICAL, 5-1/2", 13-17#,
2 7/8" EUE 8RD TOPAND BOTTOM CONNECTION, BOX X PIN, MIN 5000 PSI
DIFFERENTIAL PRESSURE,WITH MIN 5 SLIPS AND 6 DRAG BLOCKS, BYPASS
VALVE WITH BALANCEDEQUALIZING SYSTEM. |
| 2 | Description : RUNNING/RETRIEVING TOOL, RBP, MECHANICAL, FOR 5-1/2"
RBP 13-17#, 2-7/8"EUE 8RD BOX TOP CONNECTION. |
﹡HSE﹡Safety instructions:
* When running each pressure test, you must increase pressure
gradually. When the pressure is up to 20MPa, hold on for one
minute, then every 10MPa keep it for one minute until the rating
pressure;
* During doing the pressure test, the tool should be placed in the
test pit and cover the protecting board on the pressure test plug.
* During the whole process, make sure the entire test operator keep
away from plug and joint which may lapse.
* Test area should set isolation, others except operator not
allowed to enter test area.
* If there is anybody in the test area,
it should set isolation, avoiding test production fly off the test
area.
About Techcore Oil Tools
Techcore Oil Tools has committed to the design of downhole tools
for more than ten years.With the professional Research and
Development (R&D) department and skilled engineers, Techcore
improves the advanced technology in design and manufacture of the
downhole oil tools .
In order to meet different requirement of downhole operation, in
recent years, we joint with other factory who have accumulated
abundant experiences in design and development the well completion
tools, to manufacture and supply the oil well downhole tools, so
that Techcore can offer one-stop purchasing service of downhole
operation tools in well testing, well perforation, well completion.
Welcome to contact us for more information about the downhole tools
and our best service!!
