Computer Control Electronic Tensile Testing Machine , Stress Strain Testing Machine

1. introductions

This rubber tensile stress-strain testing machine is to measure and determine tensile strength, elongation at break, stress at a given elongation, elongation at a given stress, stress at yield and elongation at yield for vulcanized and thermoplastic rubber.

2. test specimen

Dumb-bells or rings specimen can be used to determine the above properties and dumb-bells are preferable.

Dumb-bell test specimen have the following outline:

Standard thickness of the narrow portion shall be 2±0.2mm for types 1, 2,3 and 1±0.1mm for type 4.

Test length of the specimen see following table:

3. test speed

100mm/min, 200mm/min and 500mm/min. This test machine can set test speed from 0.01mm/min to 500mm/min freely.

4. specification of testing machine

5. software introduction

• Easy to control and friendly interface

windows based interface, easy and fast to reach different functions, suitable for most of operators using habits. Integrated all common operation functions, like specimen information input, specimen choosing, curve plotting, data display, data process, data analysis, test operation etc., easy and convenient to operate.

• Full digital display and computer control

Adopting remote controller, fast response and reliable to parameter gathering. Realize digital adjustment and zeroing of load, deformation and displacement as well as PID parameter adjusting.

• Different control mode & speed setting
• Programmable control mode

Users can program test mode according to their own requirements.

• Load holding facility for a specific period:
• Report is editable

6. packing list

7. relative product

Dies and cutters