201 - 210 of 342
vertical flame spread testing equipment
Selling leads
|
... of roofs and components. Under this circumsance of A1.82m, B 2.4m and C 3.9m to grade A~C grade for evaluating the sample. At the same time, it ...
2025-08-13 17:42:34
|
|
...Teste Purpose: This machine is used to test the burning resistance and flame spread performance of carpets, rugs and similar floor coverings, to ...
2026-04-01 07:30:21
|
|
... flame ignition source. After the flame is removed, it is measured by holding the open flame and burning and burning time, and after the flame is ...
2025-08-13 17:43:51
|
|
...Spread of Flame (Rail & Marine) Test Product Introduction: This equipment radiates heat through a gas radiant panel and uses an imported calorimete...
2025-08-13 17:46:25
|
|
...test standards in the United States for evaluating the flame spread characteristics of materials. This test is conducted using a gas-fired radiant ...
2026-07-02 00:06:51
|
|
...Testing Equipment Wire And Cable Bunching Combustion Tester 1. Product overview: This equipment is a test device used to evaluate the ability of ...
2026-07-02 00:06:51
|
|
...Flame Retardancy Tester (Vertical Type) Used For Determining The Flame Retardant Performance Of Various Textiles - Dual Test Modes: Supports both ...
2026-03-29 00:35:29
|
|
...used to measure the lateral flame spread performance of building products. The speed of flame spread performance/flame spread speed can evaluate ...
2026-07-02 00:06:51
|
|
...Flame Surface Spread Classification Tester Introduction: BS 476-7 is mainly used for the determination of the extension of the flame which on the ...
2025-08-13 17:46:49
|
|
...Testing Machine Scope of application: It is used to evaluate the ability of vertically installed bundled wires and cables or optical cables to ...
2025-08-13 17:43:37
|