421 - 430 of 661
vertical combustion testing machine
Selling leads
|
... of Plastic Hot Air Furnace Method" and GB/T9343-2008 "Test Method for Combustion Performance of Plastics - Determination of Flash ...
2025-07-18 00:08:57
|
|
...Test apparatus for Vertical Flame Propagation of Bundles of Wires and Cables Product description: This equipment is a test device used to evaluate ...
2025-07-10 14:28:05
|
|
... of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characterist...
2025-07-10 14:24:22
|
|
...: Single Wire Or Cable Or Fiber Cable Fuel: Gas Methane Scope of application: Applicable to the flame retardation test of a single wire or cable or ...
2025-07-10 14:23:30
|
|
... Max. tensile space 1100mm (mot including fixture) Valid test width 400mm Test speed 0.5-500mm/min keyboard input to control Speed control system ...
2024-12-09 12:20:45
|
|
...-11-3. The fire hazard is evaluated by burning rate, after glow time, after flame time and damage length of the specimen. The horizontal and ...
2025-07-10 14:25:52
|
|
...； Insulating performance evaluation-Tracking resistance and Erosion resistance test； Polymer materials used under severe outdoor conditions； ...
2025-07-18 00:08:56
|
|
...Combustion Fire Resistance Testing Equipment for Construction Materials Single Burning Item Scope of application: The method used to determine the ...
2025-07-10 14:23:07
|
|
...Combustion Fire Resistance Testing Equipment for Construction Materials Single Burning Item SBI Test Fire Testing Equipment Single Burning Item ...
2025-07-10 14:23:39
|
|
...Vertical Flame Spread Tester Fire Resistance Testing Equipment for IEC 60332-3 Introduction: Bunched cable vertical flame spread tester is used to ...
2025-07-10 14:24:11
|