211 - 220 of 527
ul910 fire test lab testing equipment
Selling leads
|
...: Conduct the test in a sealed, damp, and corrosion-resistant test chamber, with a volume not exceeding 20M3. Figure B1 is a schematic diagram of ...
2026-04-30 00:08:57
|
|
Lateral Flame Spread On Building Products In Vertical Configuration Testing Machine Product Introduction: Fire testing according to ISO 5658-2 ...
2025-08-13 17:46:49
|
|
... e.g.grade 302. 1. Electrode: 0.5mm thick Material: stainless steel ; 2. Distance between upper and lower electrodes: 50.0mm ± 0.1. Our products: 1...
2026-04-30 00:08:56
|
|
... of the circuit when it is supplied to the fire under a flame of not less than 750 ℃, and is used for the evaluation of the fire performance ...
2026-04-30 00:08:57
|
|
... to the surface of combustible substrates under laboratory conditions. Conform to the standard: meet the requirements of GB/T 12441-2005 (Appendix ...
2025-08-13 17:45:45
|
|
Scope of application: Under specified conditions, the test method for testing the flame resistance characteristics of the facing fire retardant ...
2026-04-30 00:08:57
|
|
Scope of application: It is suitable for testing the fire retardant performance of fire-retardant coatings applied to the surface of combustible ...
2026-04-30 00:08:57
|
|
1.The steel structure fire retardant coating sample test furnace is suitable for the fire resistance test of all kinds of steel structure fire ...
2026-04-30 00:08:56
|
|
... of roofs and components. Under this circumsance of A1.82m, B 2.4m and C 3.9m to grade A~C grade for evaluating the sample. At the same time, it ...
2025-12-19 18:53:01
|
|
UL94 Plastics Horizontal and Vertical Burning Testing Machine Introduction: It is suitable for testing the noncombustibility of plastics or films ...
2026-04-30 00:08:56
|