51 - 60 of 296
ul790 intermittent flame test
Selling leads
|
...Test Device DX8297 Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a ...
2025-07-10 14:25:31
|
|
...Flame Testing Machine for Wire and Cable Products Overview: The performance requirements of the test machine include fire test, water spray fire ...
2025-07-10 14:28:00
|
|
...Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under specified ...
2025-07-14 00:08:24
|
|
...-11-3. The fire hazard is evaluated by burning rate, after glow time, after flame time and damage length of the specimen. The horizontal and ...
2025-07-10 14:25:52
|
|
... the spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning ...
2025-07-10 14:24:22
|
|
... Testing Machine , Helmet Flammability Test Chamber Meet the standards: GB/T 2812-2006 "hard hat test method" and GB/T 2811-2007 "...
2025-07-10 14:24:44
|
|
... flame ignition source. After the flame is removed, it is measured by holding the open flame and burning and burning time, and after the flame is ...
2025-07-10 14:23:22
|
|
... combustion test standard. It is applicable to the VW-1 of UL1581, UL13, UL444 and UL1655 and the FT-1 and FT-2 test standards of CSA. It is ...
2025-07-14 00:08:24
|
|
...Test Single Flame Source Flammability Testing Equipment Description: Ignitability test, also called single-flame source test.Test apparatus ...
2025-07-10 14:25:51
|
|
... Parameters: 1. Ambient temperature: -5 °C -30 °C 2. Relative humidity: ≤85% 3. Supply voltage and power: 220V ± 10%, 50HZ, 100W; 4. The burner ...
2025-07-10 14:24:44
|