41 - 50 of 529
thermal insulation test device
Selling leads
|
... greater than 0.1m2.K / W. A thermal flow meter is used to detect the thermal conductivity and thermal resistance of clay, sand, etc., and the ...
2026-05-01 00:13:53
|
|
... status of composite insulators in transmission lines with voltage levels of 110kV and above, as well as for hydrophobicity testing experiments and ...
2026-05-01 00:13:52
|
|
...t is placed horizontally and exposed to an inclined thermal radiation field. Suitable for all kinds of flooring materials. Such as: textile carpets...
2025-08-13 17:46:44
|
|
...Testing Machine Introduction: The composite coat of direct insulator to be tested is installed in the fog room.Through the wall casing through the ...
2025-08-13 17:47:51
|
|
...tolerate continuous, that is, in the shortest time test chemical changes or physical damage due to its thermal expansion and contraction caused. ...
2025-08-13 17:44:30
|
|
..., that is, in the shortest time test chemical changes or physical damage due to its thermal expansion and contraction caused. Suitable objects ...
2025-08-13 17:44:09
|
|
... and use under certain temperature and humidity conditions. Applicable standards: IEC 61215, IEC 61730-2004, IEC 61345 standards. Thermal cycling ...
2025-08-13 17:46:41
|
|
... and use under certain temperature and humidity conditions. Applicable standards: IEC 61215, IEC 61730-2004, IEC 61345 standards. Thermal cycling ...
2025-08-15 00:22:15
|
|
...testing flooring materials that are placed horizontally with small flame ignition under specified conditions and exposed to an inclined thermal ...
2026-05-01 00:13:52
|
|
DX8393 Wire and Cable Two Three Wheel Bending Testing Equipment 1, Applicable scope: Mainly suitable for measuring the mechanical strength of PVC ...
2025-08-13 17:45:30
|