91 - 100 of 318
smoke density test wire testing equipment
Selling leads
|
Vertical Burning Wire Fire Resistance Test Machine for Shaft Pipe Scope of application: For installation in the pole or vertically through the height ...
2025-07-10 14:21:59
|
|
DX8381 Wire and Cable Fire Resistance Testing Machine Compliance with standards: In accordance with GB12666.6 and IEC60331Test Methods for Fire ...
2025-07-10 14:22:23
|
|
... type and non-threaded terminal fixed connection components to test whether they can withstand the mechanical stress that occurs during normal use. ...
2025-07-10 14:22:04
|
|
... apparatus (FPA).The main parameters contains time to ignition,mass loss rate,heat release rate(chemical and convective) and smoke generation rate...
2025-07-10 14:24:03
|
|
...Test Device 1. Comply with standards: It is a new type of testing equipment researched and developed according to the technical conditions ...
2025-07-14 00:08:24
|
|
|
...test of aviation seat cushions 1. Comply with standards: It is a new type of testing equipment researched and developed according to the technical ...
2025-07-14 00:08:24
|
|
One Station Wire Vertical Torsion Twist Strength Testing Machine Scope of application: This machine specializes in testing the twist strength of ...
2025-07-10 14:21:59
|
|
...er specified flame conditions, and can also verify the combustion of droplets under flame conditions. Compliant with standards: Complies with the ...
2025-07-10 14:22:23
|
|
ASTM E1354 Building Material Cone Calorimeter ISO 5660-1 Application: This equipment is used for assessing the heat release rate and dynamic smoke ...
2025-07-10 14:24:51
|
|
Electric Wire Bending Resistance Testing Machine for Metal Wires Technical Parameters: 1. The sample diameter Φ0.3-φ10mm 2. The length of the sample ...
2025-07-10 14:23:40
|