161 - 170 of 183
small sample fire resistance machine
Selling leads
|
... open doorway. The method is intended to evaluate the contribution to fire growth provided by a surface product using a specified ignition source. ...
2025-08-13 17:43:18
|
|
...Machine Introduction: It is suitable for testing the noncombustibility of plastics or films under the direct combustion of specified fire source to ...
2026-04-29 00:09:33
|
|
IEC60587 6 KV High Voltage Tracking Index Tester ASTM D2303 Scope : Applicable to electrical and electronic products, household appliances and their ...
2026-04-29 00:09:33
|
|
HDI PCB Board Test Equipment Withstand current parameter tester: The HCT withstand current parameter tester can be used to find the appropriate ...
2026-04-29 00:09:33
|
|
...Equipment Introduction: This machine is suitable for assessing the vertical burning performance of rigid foam or foam rubber under laboratory ...
2025-08-13 17:43:19
|
|
...Machine for Electronic Parts Usage: Electrical and electronic products due to the use of the process of failure: such as electronic components or ...
2025-08-13 17:43:15
|
|
DX8422 Cable and optical cable line integrity combustion testing equipment Compliant with the standard: Fire resistance testing machine for cable and ...
2025-08-13 17:45:25
|
|
...: Conduct the test in a sealed, damp, and corrosion-resistant test chamber, with a volume not exceeding 20M3. Figure B1 is a schematic diagram of ...
2026-04-29 00:09:33
|
|
...times the paint film resists twisting. Torsional motion is performed until the sample is twisted or the paint film of the enameled wire falls off ...
2025-08-13 17:45:53
|
|
... voltage of 3.5 kV AC with a frequency of 50 Hz causes the surface of the epoxy resin insulating material to burn. Five groups of samples are ...
2026-04-29 00:09:33
|