31 - 40 of 45
radiation plate flame spread tester
Selling leads
|
...Cable Bunching Combustion Tester 1. Product overview: This equipment is a test device used to evaluate the ability of vertically installed bunched ...
2026-05-01 00:13:52
|
Wire & Cable Bundle Combustion Tester， Vertically Installed Bundled Wires And Cables Testing Machine
|
... spread of flames under specified conditions, and the use process needs to cooperate with smoke dust removal towers. The whole machine is composed ...
2026-03-27 09:39:32
|
|
Testing principle Place the sample in a 30-kw diffusion flame. The combustion gas is collected by the exhaust hood for analysis. Through gas analysis, ...
2026-01-15 00:43:15
|
|
...Tester SPI Test Equipment 1, Product introduction: TPP Thermal Protective Performance Tester is used to evaluate the potential skin burn grade of ...
2026-05-01 00:13:52
|
|
... of the radiant plate is 32.5kw/m2 (surface) at the distance of 75mm, and the flame height of the blowtorch is 75-100mm, which is applied to the ...
2026-05-01 00:13:52
|
|
Scope of application: It is used to evaluate the ability of vertically installed bundled wires and cables or optical cables to inhibit the vertical ...
2026-05-01 00:13:52
|
|
Product Description DX8348A cone calorimeter Main performance parameters: 1. Radiation cone: heating power: 5Kv, radiation intensity: 100Kw/m2, ...
2025-11-06 00:19:06
|
|
...used to measure the lateral flame spread performance of building products. The speed of flame spread performance/flame spread speed can evaluate ...
2026-05-01 00:13:52
|
|
...Plate Flame Spread Tester Product Introduction: The Radiant Panel Flame Spread Tester uses gas-fired radiant panels to test the flammability of ...
2026-05-01 00:13:52
|
|
...Flame Spread Testing Machine is designed accordance with the relevant provisions of UL1685,GB18380.3 standard about wire and cable burning test ...
2025-08-13 17:40:29
|