491 - 500 of 506
materials flame spread testing machine
Selling leads
|
... material diameter: 14.5mm Specimen size Method 2 Foam material: 25.4*25.4mm, non- foamed material diameter: 12.7mm Standard ASTM D395 Applications ...
2025-08-13 17:47:33
|
|
...Testing Machine IEC60587 Meet the standards: IEC60587: 1984 "Test Methods for Evaluating the Resistance to Tracking and Corrosion of ...
2025-08-13 17:40:50
|
|
DX8348A Cone calorimeter 1. Equipment standards: It conforms to the test methods specified in GB/T16172-2007 "Test method for heat release rate ...
2026-04-29 00:09:33
|
|
... resulting damage to testthe materials by exposure to sunlight with moisture and temperature. This test machine can get the results of damage after ...
2025-08-13 17:44:09
|
|
... to withstand electric stress without failure. It is used for voltage breakdown and electrical strength test of high insulating oil, insulating ...
2025-08-13 17:48:36
|
|
DX8399 Vertical Combustion Tester for Rigid Foam 【Product Introduction】This machine is suitable for evaluating the vertical combustion performance of ...
2026-04-29 00:09:33
|
|
|
【Product Introduction】This machine is suitable for evaluating the vertical combustion performance of rigid foam or foam rubber under laboratory ...
2026-04-29 00:09:33
|
|
... on the epoxy resin insulating material using a high voltage of 3.5 kV AC with a frequency of 50 Hz causes the surface of the epoxy resin ...
2026-04-29 00:09:33
|
|
Fabric Anti-static Tester EN 1149 & AATCC 76 Remark: It is used to evaluate and measure the electrostatic properties of various fibers, yarns, fabrics...
2025-08-13 17:49:30
|
|
Conductive and Compressive Heat Resistance Tester Product introduction: 1.1 This test method is used to measure the thermal-protective properties of ...
2026-04-29 00:09:33
|