131 - 140 of 1099
intermittent flame test equipment
Selling leads
|
...Flame Spread Wire And Cable Bundle Combustion Tester Application: Used to evaluate the vertical installation of bundles of wire cables or optical ...
2025-08-13 17:43:01
|
ISO 1182 Fire Testing Equipment / Micro Computer Non Combustibility Tester Electronic Power BS 476-4
|
... can be used to test the ability of the vertical flame propagation to be restrained under the standard conditions of the vertically installed ...
2025-08-13 17:42:59
|
|
...Test Device Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or ...
2026-05-01 00:13:53
|
|
ISO 9239-1:2002 Constructions Material Radiation Heat Flux Testing Machine for Floor Coverings Scope of application: Suitable for testing with a small ...
2025-08-13 17:46:44
|
|
... of the circuit when it is supplied to the fire under a flame of not less than 750 ℃, and is used for the evaluation of the fire performance ...
2026-05-01 00:13:53
|
|
...Test Machine Fire Propagation Tests On Building Materials And Structures BS476-6 Fire propagation Tests on Building materials and structures Model: ...
2026-05-01 00:13:52
|
|
...Test Machine for Shaft Pipe Scope of application: For installation in the pole or vertically through the height of a floor, test the height of the ...
2025-08-13 17:45:53
|
1 Station Fire Testing Equipment BS476-6 Fire Propagation Tests On Building Materials And Structures
|
...Tests on Building materials and structures Model: DX8298 Meet the standards: BS476-6 GB / T 17658-1999: Fire Test of Fire Retardant Wood "Fire ...
2025-08-13 17:43:05
|
|
...) to a conductor in the horizontal section of the cord and apply a 120V 48~62Hz approximate sinusoidal AC voltage to the conductors of the cord, ...
2025-08-13 17:45:54
|
|
... solid materials, laminates, films and film materials. This machine is designed according to GB/T2406 "Plastic combustion performance test ...
2025-08-13 17:42:20
|