711 - 720 of 861
impact tester standards testing
Selling leads
|
..., current and voltage of AC contactors. Standards: - GB14048.4 - GB/T14048.1 - IEC60947-4-1-2000 - IEC60947-1-1999 Technical parameters: 1. Can ...
2025-08-13 17:42:44
|
|
...is capable of testing any sample of size 165mm x 165mm and up to a maximum of 70mm thick, and measures the ignition characteristics of exposed ...
2025-08-13 17:44:07
|
|
...Testing Machine The Maximum Use Temperature of Thermal Insulation Testing Machine Application: Applicable to the assessment of maximum service ...
2025-08-13 17:48:39
|
|
...Tests: Heat Release, Smoke Production and Mass Loss Rate Flammability Testing Equipment Application: This equipment is used for assessing the heat ...
2025-08-13 17:50:03
|
|
...Test Device Application: The equipment is used to test the action characteristics of AC contactors and detect the overrun, synchronization error, ...
2025-08-13 17:40:37
|
|
...stroke, current and voltage of AC contactors. Standards: - IEC60947-4-1-2000 - IEC60947-1-1999 Technical parameters: 1. Can conduct electrical life ...
2025-08-13 17:40:37
|
|
..., organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of ...
2025-08-13 17:49:23
|
|
... Load Resistance Performance Test Furnace Test items: Used for the detection of three physical properties of doors and windows, namely air ...
2025-08-13 17:46:23
|
|
Sulfur Dioxide (Hydrogen Sulfide) Test Chamber Standard: Sulfur dioxide corrosion test for metallic and other non-metallic organic coatings under ...
2026-05-01 00:13:52
|
|
... products, etc; Provide corresponding environmental simulation and accelerated test for scientific research, product development and quality ...
2025-08-13 17:44:20
|