651 - 660 of 861
impact tester standards testing
Selling leads
|
... voltage of 1.8/3kV or below in low temperature environment. 2. Comply with the standard: TICW1-2009 Torsion test method for torsional flexible ...
2026-05-02 00:11:54
|
|
...Test Machine Applicable scope: Mainly suitable for detecting the dynamic bending test of rubber insulated and sheathed soft cables under load, and ...
2025-08-13 17:45:21
|
|
...testing machine for the outer layer of wire and cable Compliant with standard: Meet the requirements of GB/T2951 "Test methods for mechanical ...
2025-08-13 17:45:24
|
|
... testing equipment Compliant with the standard: Fire resistance testing machine for cable and optical cable line integrity GB/T19216.11-2003...
2025-08-13 17:45:25
|
|
...following wire and cable faults during the test and stopping the machine. Compliant with standards: Complies with the requirements of static ...
2025-08-13 17:45:28
|
|
... testing machine Compliant with the standard: Fire resistance testing machine for cable and optical cable line integrity GB/T19216.11-2003/IEC60331...
2025-08-13 17:45:31
|
|
...fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 2: Single-flame source test" Scope of ...
2025-08-13 17:45:43
|
|
...Testing Equipment Scope of application: Mainly suitable for vibration test of 1kg~8kg portable fire extinguisher. Conform to the standard: meet the ...
2025-08-13 17:48:21
|
|
... type and non-threaded terminal fixed connection components to test whether they can withstand the mechanical stress that occurs during normal use. ...
2025-08-13 17:45:50
|
|
... at a certain heating rate to achieve the specified thickness shrinkage. Through calculation, the shrinkage temperature of the heat load is ...
2025-08-13 17:42:21
|