121 - 130 of 538
flammability flame test chamber
Selling leads
|
...Testing Equipment for UL94-2016 Technical Parameters: Test chamber volume ≥0.5M3 Burner Bunsen burner. Tube length 100mm, inner diameter 95mm Metal ...
2025-07-10 14:25:49
|
|
... according to the technical conditions stipulated in the standard GB/8323.2-2008 and ISO 5659-2 "Test methods for the determination of smoke ...
2025-07-10 14:23:36
|
|
...fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 2: Single-flame source test" Scope of ...
2025-07-10 14:22:13
|
|
...Testing Machine Scope of application: It is used to evaluate the ability of vertically installed bundled wires and cables or optical cables to ...
2025-07-10 14:23:26
|
|
...Flame Spread Tester Product Introduction: The Radiant Panel Flame Spread Tester uses gas-fired radiant panels to test the flammability of building ...
2025-07-10 14:25:28
|
|
... surface, it is suitable for bedding (including sheet, blanket, mattress pad, pillow, duvet) and similar products used to cover the bed. Test ...
2025-07-10 14:25:32
|
|
...". Scope of application: It is mainly applicable to determine whether the building materials are flammable under the specified conditions, and ...
2025-07-10 14:23:25
|
|
...Flammability Testing Equipment Scope of application: Applicable to evaluate the relative burning performance of small samples of foam (foam rubber) ...
2025-07-10 14:23:48
|
|
... horizontally on a U-shaped bracket, ignite the free end of the sample with a specified height flame in the combustion chamber for 15 seconds, and ...
2025-07-17 00:09:41
|
|
...". Test method: the specimen is clamped horizontally on the U-shaped support, and after igniting the free end of the specimen with a flame of ...
2025-07-10 14:23:25
|