271 - 280 of 619
flammability fire testing technology
Selling leads
|
...Test Scope: 1. Reinforced concrete load-bearing walls with a single-sided fire area of 3000×3000 (mm), steel structure load-bearing walls with ...
2026-06-20 00:02:54
|
|
...Fire Resistance Testing Equipment for IEC 60332-3 Introduction: Bunched cable vertical flame spread tester is used to detect vertically mounted ...
2025-08-13 17:40:29
|
|
...substrate is also suitable for the determination of the flame resistance time of the facing fire retardant coating Conform to the standard: meet ...
2026-06-20 00:02:54
|
|
... to the standard: meet the requirements of GB/T 12441-2005 (Appendix C) test standard. Main parameters: Test station: 1 station. Test board size: ...
2026-06-20 00:02:54
|
|
... for the sample with a length greater than 800cm. With WINDOWS 7 operating interface and development software LabView, the interface style is fresh...
2026-06-20 00:02:52
|
|
...lower limits and time settings to ensure product testing accuracy and strictness, with statistical good and bad product functions; automatic timing ...
2025-08-13 17:42:30
|
|
...smoke density developed according to the technical conditions stipulated in the standard GB/8323.2-2008 and ISO 5659-2 "Test methods for the ...
2025-08-13 17:45:57
|
|
Flammability Cable Halogen Acid Gas Release Rate Testing Machine Introduction: Halogen Acid Gas Tube Furnace is used to test the acidity of the gas ...
2025-08-13 17:43:53
|
|
... with standards: A new type of testing equipment is developed based on the technical conditions specified in the national standard AC-25-01R2, Part ...
2026-06-20 00:02:54
|
|
16 CFR Part 1633 Standard For The Flammability (Open Flame) Of Mattresses Sets Test Machine Scope: Mainly used to evaluate the combustion situation ...
2026-06-20 00:02:53
|