81 - 90 of 901
flame spread testing machine
Selling leads
|
ISO 11925-2 Ignitability of Products Subjected to Direct Impingement of Flame Single-flame Source Testing Equipment Application: It is mainly ...
2025-08-13 17:43:01
|
|
... solid materials, laminates, films and film materials. This machine is designed according to GB/T2406 "Plastic combustion performance test ...
2025-08-13 17:42:30
|
|
...testing machine Application scope: Used to evaluate the ability of vertically installed bundled wires, cables, or optical cables to suppress ...
2025-08-13 17:45:07
|
|
..., fault current and other reasons, it may cause a fire, this instrument is to simulate the electrical and electronic products in the fault ...
2025-08-13 17:42:26
|
|
Flammability Cable Halogen Acid Gas Release Rate Testing Machine Introduction: Halogen Acid Gas Tube Furnace is used to test the acidity of the gas ...
2025-08-13 17:43:53
|
|
... and IEC60754-1:1994, IEC60754-2:1991 standards; At the same time, it meets the requirements of Table 6 of the GB/T19666-2005 "General ...
2025-08-13 17:45:29
|
|
...the test sample, and the test time is displayed digitally. Conform to the standard: developed in strict accordance with the main technical ...
2025-08-13 17:49:13
|
|
...the test sample, and the test time is displayed digitally. Conform to the standard: developed in strict accordance with the main technical ...
2026-04-29 00:09:33
|
|
... and helmet with flame retardant requirements. It can be used in rubber industry, plastic industry, inspection department and scientific research ...
2025-08-13 17:40:45
|
|
... combustion test standard. It is applicable to the VW-1 of UL1581, UL13, UL444 and UL1655 and the FT-1 and FT-2 test standards of CSA. It is ...
2026-04-29 00:09:33
|