61 - 69 of 69
dx8395 heating cycle tester
Selling leads
|
...tester is developed and produced according to the BS476-7 standard, and is used to measure the lateral flame spread performance of building ...
2026-07-02 00:06:51
|
|
... of MaterialsTest Apparatus 1.Introduction Building Material Radiant Panel Tester is designed according to AS/NZS1530.3; The device heat samples ...
2026-07-02 00:06:51
|
|
...tester meets international standards NF P92-505, EU 95/28 / EC, ECE technical specifications and requirements of R118 Annex 7 of these Regulations. ...
2025-08-13 17:43:54
|
|
ASTM E 1537 Heat Release Rate Tester/Large Calorimeter Areas of use: The test method is used for fire technical modelling. The data from the test ...
2025-08-13 17:40:31
|
|
... to evaluate the fire performance of walls and ceilings, and gives test results. As an indicator of flame propagation. 2. DURING THE TEST, THE ...
2025-08-13 17:46:34
|
|
... to evaluate the fire performance of walls and ceilings, and gives test results. As an indicator of flame propagation. 2. DURING THE TEST, THE ...
2025-08-13 17:46:34
|
|
... to evaluate the fire performance of walls and ceilings, and gives test results. As an indicator of flame propagation. 2. DURING THE TEST, THE ...
2026-07-02 00:06:51
|
|
... products. The speed of flame spread performance/flame spread speed can evaluate the fire retardant performance of materials. The device radiates ...
2026-07-02 00:06:51
|
|
... and environmental conditions (high and low temperature operation&storage, temperature cycling, high and low temperature gradient experiments, etc....
2026-07-02 00:06:51
|