501 - 510 of 538
astm d149 material test equipment
Selling leads
|
...Testing Equipment High Power Wire And Cable Withstand Voltage Tester 1. Wire Testing Equipment USES: Suitable for high voltage test of motor, ...
2025-07-23 00:08:08
|
|
... in the vertical position in thicknesses up to and including 1 in. (25.4 mm). The test chamber is approximately 3 feet (915 mm) high, 3 feet (915 ...
2024-12-09 12:42:42
|
|
DX8409 High Temperature Constant Temperature Oil Tank Standards: UL758, UL1581, UL62, ASTM, GB-1690 and other test standards. Scope of application: It ...
2025-07-23 00:08:08
|
|
... Deformation Tester Application: This machine is used to test the degree of thermal deformation of plastics, wire leather and other materials. ...
2025-07-10 14:25:36
|
|
IMO2010 Ftp Code Part 5 Lateral Flame Spread On Building Products In Vertical Configuration ISO5658-2 Product Introduction: Fire testing according to ...
2025-07-10 14:26:31
|
|
... -450 ℃ Temperature accuracy ± 0.2 ℃ Timing accuracy 0.1S Displacement accuracy 0.01mm Load full load Material cutting modes manual, time control, ...
2025-07-10 14:27:10
|
|
...Testing Equipment for Wire and Cable Specifications: Measuring range 0.1-800 .00g/10min (MFR) 0.1-800.00 cm3/10min (MVR) Temperature range room ...
2025-07-10 14:26:59
|
|
Flame Spread Tester ISO 5658-2 is developed and manufactured in accordance with ISO5658-2 standard and meets the requirements of IMO FTP Code ...
2025-07-23 00:08:08
|
|
The flame spread tester ISO 5658-2 is developed and produced according to the ISO 5658-2 standard, and meets the requirements of IMO FTP Code ...
2025-07-23 00:08:08
|
|
... "Test method for heat release rate of building materials". 2. The scope of use: The oxygen consumption calculated by the oxygen ...
2025-07-23 00:08:08
|