971 - 980 of 1014
accurate rubber testing equipment
Selling leads
Product Introduction: The Radiant Panel Flame Spread Tester uses gas-fired radiant panels to test the flammability of building surface materials (ASTM ...
2025-07-23 00:08:08
|
DX8368 Plastic smoke density tester 1, Compliant with standards: Meet the requirements of GB8323.2-2008 "Plastics Smoke Generation Part 2: Single ...
2025-07-10 14:23:01
|
Meet the standards: in line with GB8410, American Standard FMVSS571.302, DIN7520 "Combustion Characteristics of Automotive Interior Materials...
2025-07-23 00:08:08
|
Scope of application: It is used to evaluate the ability of vertically installed bundled wires and cables or optical cables to inhibit the vertical ...
2025-07-23 00:08:08
|
1. Scope of application: It is suitable for the evaluation of the maximum use temperature of insulation products such as loosely filled insulation ...
2025-07-23 00:08:08
|
DX8602 plastic ignition temperature tester Introduction: DX8602 ignition temperature tester is designed and manufactured in accordance with GB4610...
2025-07-10 14:26:51
|
DX8323 Wire low-temperature winding device Scope of application: It is suitable for assessing and measuring the performance of circular cables or ...
2025-07-10 14:22:30
|
Product Introduction: Radiant panel flame spread tester is used to test the flammability of building surface materials (ASTM E162) and foam plastics ...
2025-07-23 00:08:08
|
Applicable scope: These requirements cover all roof materials exposed to simulated fires outside the building, used for installation on combustible or ...
2025-07-23 00:08:08
|
Scope of application: Suitable for assessing and measuring the performance of circular cables or circular insulated wire cores at low temperatures. ...
2025-07-23 00:08:08
|