Power Transformer Combustion Test Chamber
Function configuration:
1. The dimensions and technical indexes of each part of the
equipment meet the requirements of IEC 60076-11:2004, mod
2. The combustion chamber and its components and materials are made
of 304 stainless steel, with the inner dimension of 1m × 2m × 4m,
and the outer frame is wrapped with a single layer
3. Radiant panel area (500 × 800) mm, power 24 kW (movable)
4. The inlet flow rate is 0.21 × (1 ± 15%) m3 / s, and a constant
temperature device with high power meeting the standard
requirements is equipped. The temperature is equipped with
refrigeration and heating functions, and the temperature is
controlled at 20 ± 2 ℃
5. The light transmittance of smoke measurement is 0-100%. The Φ 45
high-sensitivity solar cell is selected as the receiver. The smoke
measurement system can automatically calculate, calibrate, and test
data can be collected and stored in real time
6. The weighing range is 2000 kg, the weighing accuracy is less
than ± 0.5%, with electronic display function (the weighing range
can be selected by users)
7. The equipment is controlled by modular single chip
microcomputer, operated by computer, and data reference can be set
by itself
8. The use area of the equipment is length ≥ 2.5m × depth ≥ 5m ×
height ≥ 9m
9. The total power consumption is 28 kW (including 3 kW
thermostatic device)
Technical index:
Power supply voltage | 380V, 50Hz ≥ 25kW |
Inlet temperature | 20 ± 2 ℃ |
Inlet flow rate | 0.21 × (1 ± 15%) m3 / S |
Radiant panel power | 24kw |
Radiant plate temperature | 750 ± 5 ℃ |
1. Test time: 0-120min (settable)
2. Weighing range: 0-2000kg
3. Weighing accuracy: ≤± 0.5%
4. Transmittance: 0-100%
5. Transmittance accuracy: 3%
6. Overall dimension of combustion chamber: length 1200 × depth
2400 × height ≈ 9000 (mm)
7. The materials inside and outside the combustion chamber,
including the exhaust pipe, are 304 stainless steel with a
thickness of 2mm