1 - 10 of 578
tubing pump heavy wall
Selling leads
|
...pump. The pump barrel assembly of the tubing pump connected on the tubing string,and with its down to the bottom of the well.Plunger assembly ...
2024-12-09 13:41:08
|
|
...,we can pull the traveling valve and standing valve out the well through the sucker rod string, plungerand the puller ,instead of pull the whole ...
2024-12-09 17:20:08
|
|
... two main types of pumps: rod and tubing. Rod pumps also are called insert pumps because they are run (inserted) in the production tubing. Tubing ...
2025-07-30 00:08:38
|
|
... Pump is also called pipe type pump,the feature is that assemble the outer cylinder liner,the bush and the suction valve well on the ground,and ...
2024-12-09 17:15:53
|
|
... pump down to the bottom. Plunger assembly is connected with rod string and down into the bottom hole pump barrel, moving up and down, so as to ...
2024-12-09 12:40:14
|
|
... types of rod pumps. These are classified by the type of barrel (standing or traveling) and where the pump is anchored (top or bottom). API Spec. ...
2024-12-09 17:33:20
|
|
... nipples in API-RHBM-AC) , seating nipple connection on the tubing string, down to the bottom of the well with the tubing string. Plunger assembly ...
2025-07-30 00:08:38
|
|
... well at desired depth and then the plunger is run into the barrel with the sucker rod. The applicable tubing pump is larger in size than rod pump ...
2025-07-30 00:08:38
|
|
... is connected to sucker rod after being assemblied on the surface then it is pulled down to the well bottom through the tubing. It is not necessary ...
2025-07-30 00:08:37
|
|
... up and down with the sucker rod string .It is suitable for reducing the time of workover for deep well as it is not neccessary to pull all the ...
2025-07-30 00:08:37
|