31 - 40 of 454
thread welding pump plunger
Selling leads
|
...barrel and plunger materials and surface finishes. Product Model: RHAC, RWAC, RHAM, RWAM, RHBC, RWBC, RHBM, RWBM Pump Barrel Material: AISI1045 ...
2025-08-01 00:09:11
|
|
...Plunger Inserted Downhole Sucker Rod pump Plunger Inserted Sucker Rod Pump Description Sucker-rod pumps are a key component of a sucker-rod lift ...
2025-08-01 00:09:11
|
|
... plated pump barrel assembly of the tubing pump connected on the tubing string,and with its down to the bottom of the well.Plunger assembly ...
2024-12-09 13:27:07
|
|
... the seating nipple. There is no need to lift the tubing, which reduces operation time and cost, frequency of turning on and off tubing threads, ...
2024-12-09 12:59:34
|
|
...run into the well and seated inside the seating nipple. There is no need to lift the tubing, which reduces operation time and cost, frequency of ...
2024-12-09 13:10:09
|
|
... will close, When the plunger go up, the stationary valve open and oil will go through the pump, since the bottom pressure is higher than the uper ...
2025-08-01 00:09:11
|
|
... to pull out the tubing string, which can reduce maintenance time and downtime. The life span of tubing can be prolonged by decreasing times of ...
2025-08-01 00:09:11
|
|
... to the size and number of sand in the customer’s well conditions , reasonable choice of different screen type and size. Technical Specifications ...
2025-08-01 00:09:11
|
|
...Pump Plunger Sucker Rod Pump Fitting 1. Description Surface of the plunger is coated with nickel alloy and inside wall of the barrel is coated with ...
2025-08-01 00:09:11
|
|
...Pump Sucker Rod Pump Product description operating principle of rod pumps:Rod pump is equipped with a supporting joint , support joint is connected ...
2024-12-09 13:16:58
|