531 - 540 of 732
smooth inserted rod pump
Selling leads
|
... products conform to API Spec. 11E “Specification for Pumping Units”, and the relative standards, acquired the authorization to use Official API ...
2025-08-02 00:09:09
|
|
...Pump For Oil Extraction Plunger oil well tubing pump description: API recognizes two main types of pumps: rod and tubing. API tubing pump model: ...
2025-08-02 00:09:09
|
|
... will close, When the plunger go up, the stationary valve open and oil will go through the pump, since the bottom pressure is higher than the uper ...
2025-08-02 00:09:09
|
|
...Pump barrel Specifications Code and explain Size Part No. API No. B11—Barrel,Thin wall,Rod pump (Surface heat treatment hardening is not supported ...
2025-08-02 00:09:09
|
|
... on the tubing string, down to the bottom of the well with the tubing string. Seating nipple is one of the key pump accessories. Seating nipple ...
2024-12-09 13:38:21
|
|
...API Certificated Pump Plunger AISI 1045 Material Thread Welding Monel-Pins Product Description Plunger &valve ball and seat are important part of ...
2025-08-02 00:09:09
|
|
... Nickel-based alloy powder also the tungsten carbide powder,Plunger with sand scraping ring can effectively prevent sand from entering the pump ...
2025-08-02 00:09:09
|
|
Products Description API B series beam balance pumping unit is a kind of light-weight beam-pumping unit. It adopts beam balance and is widely used as ...
2025-04-11 10:26:29
|
|
... life of the sucker rod pumps. • 3. Each ball-and-seat combination is vacuum tested to ensure a perfect seal is obtained in all positions of ...
2024-12-09 22:20:35
|
|
... need put the whole pump forward well through the sucker rod string together , operation is simple. Long plunger and antisand sticking pump is ...
2025-08-02 00:09:09
|