131 - 140 of 792
oil sucker pump
Selling leads
|
Sucker Rod Plunger For Sucker Rod Pump Product description The pump body of the rod pump is inside the tubing string and is connected to the tubing ...
2026-07-02 00:22:07
|
|
... pump is suitable for sand production well since the fluid discharged from the guide cage washes away the sand between tubing and the top of the ...
2026-07-02 00:22:07
|
|
Chinese API sucker rod pump Model mm(in) Nominal Dia. m(ft)Plunger Length Stroke m m3/d Pump Constant Tubing And Thread In Sucker Rod 20-125TH 32(1.25...
2026-07-02 00:22:07
|
|
API 11AX sucker rod pump Description of oil pump The rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down ...
2026-07-02 00:22:05
|
|
...Sucker Rod Pump Thin walled sucker rod pump description Thin walled sucker rod pump is RW series, the models are listed as below: API-RWAM, Rod, ...
2024-12-09 13:43:22
|
|
...sucker rod pump Mechanical seating or cup seating sucker rod pump description For this type of pump, the barrel is put in the well to the designed ...
2026-07-02 00:22:07
|
|
...suction valve well on the ground,and connect at the bottom of the oil,into the wells,then use the sucker rod pump through tubing to put the piston ...
2026-07-02 00:22:07
|
|
...low-viscosity crude oil extraction, but also applicable to the extraction of heavy oil, high freezing point oil, high wax oil, high sand-containing ...
2024-12-09 12:44:46
|
|
... to lift the tubing, which reduces operation time and cost, frequency of turning on and off tubing threads, and prolongs run life of the tubings. ...
2024-12-09 13:12:37
|
|
... to lift the tubing, which reduces operation time and cost, frequency of turning on and off tubing threads, and prolongs run life of the tubings. ...
2024-12-09 13:15:41
|