1 - 10 of 259
mechanical seating tubing pump api 11ax
Selling leads
|
...suction valve well on the ground,and connect at the bottom of the oil,into the wells,then use the sucker rod pump through tubing to put the piston ...
2025-07-26 00:08:14
|
|
... surface 3. Valve ball and seat materials: stainless steel and tungsten carbide 4. Sucker rod pump are manufactured in accordance with API 11AX 5...
2025-07-26 00:08:14
|
|
API 11AX DOWNHOLE SUCKER ROD PUMP Product Description Various pumps and spare parts conform to API SPEC 11AX, and special pumps can be designed and ...
2025-07-26 00:08:14
|
|
... rod directly, it can be pulled out with sucker rod and does not influence the tubing, so the well inspection and workover is more convenient. It ...
2025-07-26 00:08:14
|
|
Chinese API sucker rod pump The suck rod pumps can be set into wells in sequence as follows: barrel is run down to the setting depth on the tubing and ...
2025-07-26 00:08:14
|
|
Tubing pump introduction Tubing pump is characterized in that the outer barrel, bushing and suction valve are assembled on the ground and connected to ...
2024-12-09 17:15:06
|
|
..., and tolerance requirements, but also standardized, widely used pump-component materials. Various material descriptions, their API identification ...
2025-07-26 00:08:14
|
|
... liner,the bush and the suction valve well on the ground,and connect at the bottom of the oil,into the wells,then use the sucker rod pump through ...
2024-12-09 12:51:04
|
|
..., and tolerance requirements, but also standardized, widely used pump-component materials. Various material descriptions, their API identification ...
2025-07-26 00:08:14
|
|
...API sucker rod pump Sucker Rod Pump For this type of pump, the barrel is put in the well to the designed depth with tubing. And then put the ...
2025-07-26 00:08:14
|