691 - 700 of 795
insertable sucker rod pump
Selling leads
|
.... There is no need to lift the tubing, which reduces operation time and cost, frequency of turning on and off tubing threads, and prolongs run life ...
2024-12-09 13:10:09
|
|
... Plungers Grooved Spray Metal 45# Carbon Steel With Pin Grooved Plungers in Rod Pump Description The metal spray-welded plunger is a key component ...
2025-07-30 00:08:38
|
|
Products Description Beam pumping unit is a type of conventional oil production equipment in mechanical balance. All our beam pumping units conform to ...
2025-04-11 10:26:29
|
|
... string, down to the bottom of the well with the tubing string. Surface hardened pump barrel has the wear-resistant feature, the usual material is ...
2024-12-09 13:36:10
|
|
... Wall, Cup Seating, Tubing pump), THM pump (Stationary Heavy Wall Mech. Seating, Tubing Pump) and THD pump. Tubing pump has simple structure so the ...
2024-12-09 13:41:08
|
|
...tubing size, the bore of the tubing pump is larger than that of the rod pump, so the pump rate is higher. For some large production wells, larger ...
2024-12-09 17:15:53
|
|
... on the top by a holder. This type of rod pump is suitable for sand production well since the fluid discharged from the guide cage washes away the ...
2024-12-09 17:37:15
|
|
..., etc. Simple structure and easy operation is main feature of rod pump. Main accessories Pump barrel assembly: the body of pump barrel is made of ...
2024-12-09 13:49:50
|
|
...the pump is limited only by the size of the inner casing and the unit discharge required by the customer. The pump body of the rod pump is ...
2024-12-09 12:40:14
|
|
Pin Ends Spray Metal Coating Plungers Oilfield Pump Parts Pin Ends Pump Plungers Description Pump plunger moves up and down in the rod pump to extract ...
2025-07-30 00:08:38
|