151 - 160 of 186
heavy walled linear rod pump
Selling leads
|
...Pump For Sucker Rods Subsurface tubing pump description: API-TH,Tubingl, Heavy Wall Barrel, Tubing Pump The pump barrel assembly of the tubing pump ...
2024-12-09 17:08:26
|
|
...rod pump Product Features For some large production wells, larger bore of tubing pump can be worked if the on-off connector is installed. Tubing ...
2025-04-11 10:26:24
|
|
...Pump barrel Product description TThe barrel is main parts of subsurface sucker rod pump, it has two type of heavy wall thickness and thin wall ...
2025-08-01 00:09:11
|
|
...the small OD of the barrel, a larger-sized rod pump can be run in an oil well with a small-sized tubing to increase production. In addition, ...
2025-08-01 00:09:11
|
|
... of plunger (or pump-bore) sizes standardized by the industry. The API pump-bore sizes that are currently available range from 1 1/16 to 3 3/4 in. ...
2024-12-09 13:22:13
|
|
... on the tubing string, and it is together with the tubing string down to the bottom. Plunger assembly is connected on the rod string and together ...
2025-08-01 00:09:11
|
|
... body goes down with the sucker rod column. The pump body of the rod pump is connected to the tubing string inside the tubing string by a support ...
2024-12-09 12:40:14
|
|
... are basically the same. Technical parameter list Specification Pump diameter (in) Barrel length (ft) Plunger length (ft) Stroke length (ft) ...
2024-12-09 12:40:14
|
|
... Wall, Cup Seating, Tubing pump), THM pump (Stationary Heavy Wall Mech. Seating, Tubing Pump) and THD pump. Tubing pump has simple structure so the ...
2024-12-09 13:41:08
|
|
... with the tubing string down to the bottom. Plunger assembly is connected on the rod string and together with the whole pump down to support joint ...
2024-12-09 13:05:17
|