271 - 280 of 572
api tubing pup joint
Selling leads
|
API Wheeled Rod Guides for 3/4 Sucker Rods & 2-7/8 6.5ppf N80 Tubing Products Description: 1) On the first two or three rods above the bottom hole ...
2024-12-09 17:15:06
|
|
..., the bore of the tubing pump is larger than that of the rod pump, so the pump rate is higher. According to seating mode, the rod pump can be ...
2025-07-29 00:08:29
|
|
...API sucker rod pump For this type of pump, the barrel is put in the well to the designed depth with tubing. And then put the plunger into the ...
2025-07-29 00:08:29
|
|
...API sucker rod pump For this type of pump, the barrel is put in the well to the designed depth with tubing. And then put the plunger into the ...
2025-07-29 00:08:29
|
|
...API sucker rod pump Sucker Rod Pump For this type of pump, the barrel is put in the well to the designed depth with tubing. And then put the ...
2025-07-29 00:08:29
|
|
...is convenient for the inspection and workover because they can be pulled up and down through the tubing and suitable for deeper well. The life span ...
2024-12-09 19:20:36
|
|
... Plunger together with standing valve can be lifted out integrally for normal pump check, with the tubing remain intact. This makes the tubing ...
2025-07-29 00:08:29
|
|
... hold-down. Plunger together with standing valve can be lifted out integrally for normal pump check, with the tubing remain intact. This makes the ...
2025-07-29 00:08:29
|
|
... wear. However, special mechanical paraffin scrapers have been developed to also aid in keeping paraffin off the tubing and most of the sucker-rod ...
2024-12-09 22:39:11
|
|
API 11AX sucker rod pump Description of oil pump For this type of pump, the barrel is put in the well to the designed depth with tubing. then put the ...
2025-07-29 00:08:30
|