721 - 730 of 740
api sucker rod
Selling leads
|
...standing valve appear problems,we can pull the traveling valve and standing valve out the well through the sucker rod string, plungerand the puller ...
2024-12-09 17:28:02
|
|
... the outer cylinder liner,the bush and the suction valve well on the ground,and connect at the bottom of the oil,into the wells,then use the sucker ...
2024-12-09 17:33:20
|
|
... string,and with its down to the bottom of the well.Plunger assembly connected on the sucker rod string and with it down to the pump barrel ...
2025-07-31 00:13:15
|
|
... to the bottom of the well. Tubing anchor catcher is run below a sucker-rod pump to anchor the lower end of the tubing string. Then the string can ...
2024-12-09 19:20:36
|
|
SUCKER ROD PUMP VALVE BALL AND VALVE SEAT Tungsten carbide valve and seat carbide ball Tungsten carbide valve seat are ...
2024-12-09 22:20:35
|
|
Product Description Sucker rod pumps valve balls and valve seats are widely used in oil fields, their performance directly affects the use effect and ...
2025-07-31 00:13:14
|
|
Applications • Vertical, deviated, and horizontal wells. • Extended-reach wells and wells with high dogleg severity. • Wells with temperatures up to ...
2025-07-28 19:12:04
|
|
... types of rod pumps. These are classified by the type of barrel (standing or traveling) and where the pump is anchored (top or bottom). API Spec. ...
2025-07-31 00:13:15
|
|
API 11AX Certificated One Piece Plungers Grooved Spray Metal 45# Carbon Steel With Pin Grooved Plungers in Rod Pump Description The metal spray-welded ...
2025-07-31 00:13:15
|
|
...) in the production tubing. Tubing pumps are so named because the working barrel of this pump is coupled with the production-tubing string. There ...
2025-07-31 00:13:15
|