661 - 670 of 735
api subsurface sucker rod pump
Selling leads
|
...ause they are run (inserted) in the production tubing. Tubing pumps are so named because the working barrel of this pump is coupled with the ...
2025-07-29 00:08:29
|
|
... well at desired depth and then the plunger is run into the barrel with the sucker rod. The applicable tubing pump is larger in size than rod pump ...
2025-07-29 00:08:30
|
|
...Pump Product Description RHAC rod pump is equipped with a cup seating nipple N11, cup seating nipple N11 connection on the tubing string, down to ...
2024-12-09 12:40:14
|
|
...bottom of the well.Plunger assembly connected on the sucker rod string and with it down to the pump barrel position in the well,then with it do up ...
2024-12-09 12:49:00
|
|
...need put the whole pump forward well through the sucker rod string together , operation is simple. Working principle: RHAC rod pump is equipped ...
2025-07-29 00:08:30
|
|
... it is not necessary to run and pull the tubing out of the well when checking pump. It can enter the tubing with the sucker rod and set, which can ...
2025-07-29 00:08:30
|
|
... types of rod pumps. These are classified by the type of barrel (standing or traveling) and where the pump is anchored (top or bottom). API Spec. ...
2025-07-29 00:08:30
|
|
High Performance Oilfield Downhole Pump Barrel Product Description The pump barrel is made of by using the high quality special-puurpose blank. The ...
2024-12-09 13:28:59
|
|
... to the bottom of the well. Tubing anchor catcher is run below a sucker-rod pump to anchor the lower end of the tubing string. Then the string can ...
2024-12-09 19:20:36
|
|
SUCKER ROD PUMP VALVE BALL AND VALVE SEAT Tungsten carbide valve and seat carbide ball Tungsten carbide valve seat are specifically developed to ...
2024-12-09 22:20:35
|