501 - 510 of 798
api standard srp pump
Selling leads
|
Tubing pump introduction Tubing pump is characterized in that the outer barrel, bushing and suction valve are assembled on the ground and connected to ...
2024-12-09 17:15:06
|
|
The oil well pump has the following requirements: (1) It should have sufficient strength and good sealing. (2) It is required to work reliably and ...
2024-12-09 17:20:42
|
|
SB series centrifugal sand pump The primary application of the SB series centrifugal sand pump is in the solids control circulating system of oilfield ...
2025-04-11 10:27:05
|
|
Products Description API B series beam balance pumping unit is a kind of light-weight beam-pumping unit. It adopts beam balance and is widely used as ...
2025-04-11 10:26:29
|
|
API 11AX sucker rod pump Description of oil pump The rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down ...
2025-07-19 00:12:49
|
|
API 5CT Standard Pup Joint With Seamless Nipple And Pup Joint For Oilfield Services Products Descriptions: The pup joint is a pipe of non-standard ...
2024-12-09 12:53:22
|
|
API 11AX Sucker rod pump Valve ball&seat Product Description For different material of the valve cage, we have different heat treatment process, to ...
2025-07-19 00:12:49
|
|
...Pump Plunger Sucker Rod Pump Fitting 1. Description Surface of the plunger is coated with nickel alloy and inside wall of the barrel is coated with ...
2025-07-19 00:12:49
|
|
The rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down to the well bottom through the tubing. Thus it is ...
2024-12-09 17:15:06
|
|
After the rod type oil well pump is integrally assembled on the ground, it is connected to the lower end of the sucker rod and runs into the well ...
2024-12-09 17:15:06
|