211 - 220 of 647
api 11e pumping unit
Selling leads
|
... pump used in severe corrosive condition oil wells. Sucker rod pump has RHAC, RHBM, RHBC, RWAM, RWAC, RWBM. Rod pump should be installed inside the ...
2025-07-28 00:09:48
|
|
... Pump is also called pipe type pump,the feature is that assemble the outer cylinder liner,the bush and the suction valve well on the ground,and ...
2024-12-09 17:15:53
|
|
... up and down with the sucker rod string .It is suitable for reducing the time of workover for deep well as it is not neccessary to pull all the ...
2025-07-28 00:09:48
|
|
API SPEC 11AX Suker Rod Pump Tube Well Pump Rod Tungsten Carbide Valve Ball The pump barrel assembly of the tubing pump connected on the tubing string...
2024-12-09 17:51:29
|
|
... string. It is suitable for reducing the time of workover for deep well as it is not necessary to pull all the tubing out of the well hole when ...
2025-04-11 10:26:24
|
|
... it is not necessary to run and pull the tubing out of the well when checking pump. It can enter the tubing with the sucker rod and set, which can ...
2025-07-28 00:09:47
|
|
...API sucker rod pump The suck rod pumps can be set into wells in sequence as follows: barrel is run down to the setting depth on the tubing and then ...
2025-07-28 00:09:47
|
|
...API sucker rod pump For the deep well, We researched and develop the suspension pump. This pump barrel uses a suspension structure, thus it ...
2025-07-28 00:09:47
|
|
...Pump 30-250 Thin-walled Sucker Rod Pump Description Thin wall series rod pump has four groups: RWAC, RWBC, RWAM, RWBM. Sucker rod pump is equipped ...
2025-07-28 00:09:48
|
|
..., plunger, travelling valve and standing valve. The structure is strong and udurable. The standing valve of the tubing pump is connected to the ...
2025-07-28 00:09:48
|