91 - 100 of 114
api11ax bore hole pump
Selling leads
|
...Products Description: 1) On the first two or three rods above the bottom hole pump. 2) Intermittently throughout the rod string where wear is ...
2024-12-09 17:15:06
|
|
...installed: 1) On the first two or three rods above the bottom hole pump. 2) Intermittently throughout the rod string where wear is indicated on ...
2024-12-09 17:15:06
|
|
... while being run into the hole. The valve is always in the open position allowing maximum filling of the casing as it is lowered into the well bore...
2024-12-09 17:11:02
|
|
... 2. Operational and general design features are the same as Hinged Welded Bow Spring Centralizers 3. Maximum flow and well bore stabilization 4. ...
2024-12-09 17:11:02
|
|
...o the hole. The valve is always in the open side position allowing maximum filling of the casing as it is lowered into the well bore. This is ...
2024-12-09 17:15:06
|
|
...the oil industry to join together the surface and down hole components of a reciprocating piston pump installed in an oil well. The pump jack is ...
2024-12-09 12:40:14
|
|
...wall of the hole is scraped and cleaned using a pump. Once the bottom plug is in place, the pressure is increased to 2-4 MPa to break the rubber ...
2025-04-11 10:27:23
|
|
3/4" 7/8" 1" T Sucker Rod Coupling SM SH FS Coupling Product Description The couplings are available in full size, slim hole and over size.Also, ...
2025-04-11 10:26:35
|
|
3/4" 7/8" 1" T Sucker Rod Coupling SM SH FS Coupling Product Description Sucker rod couplings are used to connect sucker rod or pony rod. This kind of ...
2025-04-11 10:26:36
|
|
...Roller Centralizer should be installed: 1) On the first two or three rods above the bottom hole pump. 2) Intermittently throughout the rod string ...
2024-12-09 22:39:11
|