511 - 520 of 642
1 4 sucker rod pump
Selling leads|
...pump introduction Tubing pump is characterized in that the outer barrel, bushing and suction valve are assembled on the ground and connected to the ...
2024-12-09 17:15:06
|
|
...Rod Product Application of Polished Rods Polished rods are an integral component in the oil and gas industry, specifically used to connect sucker ...
2026-07-02 00:22:05
|
|
... and material: Pump barrel: plain carbon steel plating (A1), ordinary carbon steel carbonitriding (B1), ordinary carbon steel carburizing (B2), low ...
2024-12-09 12:45:06
|
|
... liner,the bush and the suction valve well on the ground,and connect at the bottom of the oil,into the wells,then use the sucker rod pump through ...
2026-07-02 00:22:06
|
|
...Pump Barrel Product Description The subsurface sucker rod pump is consist of tubing coupling, extension nipple, barrel coupling, barrel, traveling ...
2024-12-09 13:27:07
|
|
Pumping unit is the main ground equipment in the pumping system of pumping unit deep well pump. The beam pumping unit is mainly composed of beam - ...
2024-12-09 17:20:42
|
|
...mounted to the top by a bracket. The rod pump is suitable for sand production Wells and oil Wells, due to the discharge of fluids will wash away ...
2026-07-02 00:22:07
|
|
...Pump Parts , Oilfield Spray Metal Plunger Product Description The Spray Metal Plunger is a key part of sucker rod pump. It moves up and down to ...
2026-07-02 00:22:07
|
|
Product Name: API 11e C series pumping unit Product overview: API C series pumping unit is a conventional beam pumping unit, which adopts the crank ...
2024-12-09 17:20:42
|
|
...tubing out of the well when checking the pump, which can make the operation easier and quicker. According to seating mode, the rod pump can be ...
2026-07-02 00:22:05
|
