471 - 480 of 650
lpg heating spray dryer
Selling leads
|
... dryer in continuous production. Raw material fed from top or bottom of drum and stick on the drum. Filling steam or thermal oil inside the drum, ...
2026-07-02 00:33:00
|
|
... production. Raw material fed from top or bottom of drum and stick on the drum. Filling steam or thermal oil inside the drum, the heat then ...
2026-07-02 00:33:00
|
|
... dryer in continuous production. Raw material fed from top or bottom of drum and stick on the drum. Filling steam or thermal oil inside the drum, ...
2026-07-02 00:33:00
|
|
... dryer in continuous production. Raw material fed from top or bottom of drum and stick on the drum. Filling steam or thermal oil inside the drum, ...
2026-07-02 00:33:00
|
|
... Tray Dryer 1. As the boiling point of the material solution decreases under vacuum, the heat transfer impetus of the evaporator increases, so a ...
2026-07-02 00:33:00
|
|
... resource for choice: steam, electricity, heat conducting oil, both steam and electricity. ◆ _The temperature (steam heating): 50-150℃ _. ◆ _The ...
2026-07-02 00:33:00
|
|
... through the hollow shaft. The heat transfer area per unit effective volume is large. The temperature range of the heat transfer medium is -40°C to ...
2025-10-29 00:16:29
|
|
... such as drying, cooling, heating, sterilization, reaction, and low-temperature combustion can be completed. 3.The special wedge-shaped stirring ...
2025-10-29 00:16:29
|
|
...Dryer Dual counter-rotating shafts with unique intermeshing hollow wedge-shaped paddles produce intimate mixing, optimize heat transfer, and ...
2025-10-29 00:16:29
|
|
...Dryer Applicable for drying or cooling of paste, particle, powder and slurry state of material, perform the process of drying, cooling, heating, ...
2025-10-29 00:16:29
|