Galvanized steel pipe close to the ground fitness equipment for
open area KP-E037How to solve the common faults of playground equipmentPlayground equipment has developed rapidly in recent years. A large
number of playground equipment manufacturers have shipped to
investors. From delivery to operation, they have brought very good
income to investors, and the amusement market has also caused
amusements due to safety issues. The equipment in the field is
faulty. The playground equipment is a special kind of equipment.
Due to factors such as quality, running time, passenger capacity,
parts wear or looseness, the equipment may malfunction. The
following is a brief introduction to common faults and emergency
methods for playground equipment:Can't start cause of issue: First, the electric control cabinet and the line problem: If the
general equipment can not be started, then the first check is
whether the power is on. If the light is on, it means that the
equipment power supply is connected to the control cabinet. There
is no problem, then check the control cabinet to check the knife.
Or if the fuse is blown, if the indicator light is off, you need to
check whether the line of the control cabinet is disconnected or
shorted. If found, please replace the line immediately.Second, check whether the motor is faulty: the fault of the motor
must be excluded in the case where the fault is not present, and
then the problem of the motor is checked. If it is preferred to
check multiple motors, it needs to be checked one by one, and then
check. Whether the motor rotates during the opening process. If it
is found that it does not rotate, then we need to contact the
playground equipment manufacturer for replacement. If it turns,
then we will check whether the equipment is loose or worn.2. Startup is not smooth cause of issue: Under normal circumstances, there are three points in this
situation. The first is that the long-term friction causes the
equipment to wear seriously and the start-up is not good. The
second is the voltage instability. For the mobile operators, the
voltage instability is a common problem. Then we need to replace
the larger squared line or replace the access point. The third is
that the triangle belt is loose, then we need to adjust the
distance between the motor and the pulley to solve it!3. The operation sound is too loud cause of issue: In general, the running sound is too large. Generally, the
mechanical part distance is not adjusted well. The connection is
not done well. The first is whether the gap is too large or too
small during the installation, and then adjust according to the
situation. Then check whether the equipment is placed. Leveling, if
it is found that the ground is not flat or the air pressure is
insufficient, etc., it is necessary to adjust. Finally, check
whether the friction between the rotating part and the bearing
becomes large, and increase the lubricating oil appropriately.Playground equipment failure prevention and how to find faults1. Common equipment failures in playground equipment. (1) Sudden
shutdown; (2) Mechanical break; (3) Falling from high altitude.2. The cause and prevention of the malfunction. The playground equipment is composed of several systems. The causes
of the faults are very complicated, mostly caused by improper
maintenance or not. Therefore, the prevention of failures is
focused on strengthening daily maintenance and regular inspections.3. Emergency points. (1) When there is physical discomfort during the play and feel
unbearable, the staff should be reminded to stop the machine in a
timely manner. (2) When there is an abnormal shutdown, do not tamper with and
release the safety device yourself. Keep calm, listen to the staff
and wait for rescue. (3) When there is an emergency such as accidental casualties, avoid
panic, squatting, and crowding, and organize evacuation in time. 4. Expert tips. (1) When visiting tourists, you must first carefully read the
"Guide to Tourists", listen to the staff to explain, master the key
points of play, high blood pressure, heart disease and other
personnel do not play with the project that is not suitable for
their own body. Leading minors to play a good role in monitoring. (2) Any playground equipment has corresponding safety protection
devices. When equipment failure occurs, it is the best choice for
tourists to keep calm and obey the command. Waiting for rescue is
the best choice for tourists, and can reduce the severity of
accidents and even avoid personal injury accidents.Measurements (mm) | 300×12×260CM(L*W*H) | Certificate | ISO9001, SGS,CE | Modules | Roofs, slides, plastic panels, stairs, decks, tubes and posts,
climbing. | Advantage | a.Anti-UV | b.Anti-static | c.Security | d.Environmental protection | e.Color is not easy to fade | Installation | 2 day (2 persons) | Age Range | 3--12 age | Apply to | Amusement park, kindergarten, preschool, residential area. | Packing | Standard export packing | Plastic parts: Bubble bag and pp film; | Iron parts: Cotton and pp film | Delivery Volume:1CBM | Use Life | 7-10 years |
|