Pressure Seal Gate Valve Butt-welded High Pressure Class 600-2500 4" - 24"
|
Pressure Seal Gate Valve Butt-weld End High-Pressure Class 600-2500
For gate valve with pressure Class 600 / PN100 or higher, Pressure seal bonnet is suggested for better closure, while bolted bonnet is still available for customer's option. The pressure seal design incorporates a metal-to-metal seal that becomes tighter as the pressure increases. The initial preload deforms the taper on the soft iron gasket to mate with the taper on the bonnet. The thin knife-edge on the gasket is wedged tightly between the body and the bonnet. The shallow angle ensures that the gasket is sealed tightly with only a small upward force on the bonnet. Once the initial seal is created, the body/bonnet joint will remain leak free regardless of thermal or pressure conditions in the valve. After the joint has been assembled, there is no further need to adjust bonnet cap screws.
Features of BW End Pressure Seal Gate Valves: Pressure seal bonnet
Applicable standards of BW End Pressure Seal Gate Valves:
|
Product Tags: high pressure gate valve gear operated gate valve |
![]() |
API 602 Forged Steel Gate Valve, Socket Welded Gate Valve Regular Port Reduced |
![]() |
Fully Piggable Through Conduit Gate Valve, Cast Steel Slab Gate Valve Class150 |
![]() |
API 600 Cast Steel Gate Valve Class 150-1500 Rising Stem OS&Y Bolted Bonnet |
![]() |
API 603 Stainless Steel Gate Valve Economic CF8 CF8M CF3 CF3M Flexible Wedge |
![]() |
Pressure Seal Gate Valve Butt-welded High Pressure Class 600-2500 4" - 24" |
![]() |
Non-rising Stem Gate Valve NRS Handwheel Operation, Long Life Span |