11 - 20 of 49
rs485 analog signal converter
Selling leads
|
...tank side, we use a wireless analog I/O module to collect the level sensor's 4-20mA signal Control center, there is a pump nearby. We use a LS...
2024-12-09 18:45:38
|
|
...analog input distribution isolator, is to provide isolation power for two-wire transmitters and three-wire transmitters on site, and also ...
2024-12-09 19:08:14
|
|
... are used to collect sensors' 4-20mA signal and transmit to PLC/HMI in control room by wireless. They are widely used in industry automation. ...
2024-12-09 21:09:59
|
|
Input Input signal: 4-20mA; 0-20mA Distribution voltage: 24V, (maximum drive current 30mA) Input impedance: ≤50Ω Output Output signal: 4-20mA; 0-20mA; ...
2024-12-09 18:44:27
|
|
Input Input signal: 4-20mA; 0-20mA; 0-75mV, 0-5V; 0-10V Distribution voltage: 24V, (maximum drive current 30mA) Input impedance: current input: ≤50Ω; ...
2024-12-09 19:08:14
|
|
Input Input signal: 4-20mA; 0-20mA Maximum input current: 25mA Distribution voltage: ≥21VDC Input impedance: ≤25Ω Output Output signal: 4-20mA; 0-20mA...
2024-12-09 18:44:27
|
|
LS-RAO02-Lora wireless analog acquisition module LS-RAO02-Lora Modbus RTU is a 1W I/O module, 2 analog outputs. Wireless control around 5km LOS. Use ...
2024-12-09 18:15:15
|
|
RS485/232 to Analog Current or Voltage Signal Converters, D/A Converter Output is 1 channel voltage/current signal, or 2-channel common ground current...
2024-12-09 18:44:27
|
|
...signal to RS485/232 Converter, 24 Bits A/D module Features: 8 analog signal acquisition, isolated converter RS-485/232 output 24-bit AD converter, ...
2024-12-09 18:44:27
|
|
... line. Features: Analog signal input for voltage or current, isolated RS-485/232 output 12-bit AD converter, testing accuracy>0.1% Can Program and ...
2024-12-09 18:44:27
|