Automatic Water Spray Test Chamber Programmable Controller MIL STD 810

MIL STD 810 Water Test Chamber

MIL STD 810 Water Test Chamber used for military equipment or electronic products in a variety of intensities of rain in the environment to simulate dynamic operation, military equipment rain test methods and main parameters, in a test chamber can achieve a wind source of rain test, drip rain test.

MIL STD 810 Water Chamber,Determine the ability of the shell seals of Water Test Chamber or electronic products to prevent rainwater penetration under rain conditions and the working efficiency of the product when or after the rain, and evaluate the waterproof working quality of the product.

Specification

Details

Features

1. Rain blowing: the horizontal wind speed ≥ 18m/s, the wind source relative to the direction of the test sample, can make the rain change from the horizontal direction to 45 ° angle and evenly blow on one side of the test sample;

2. Drip rain: raindrops fall evenly, so that all the upward surfaces of the sample on the test bench can be affected by raindrops at the same time during the test period with the test ability to rain rain falling at a uniform speed from a height of 1 m and the test duration is greater than 15 minutes.

3. Drip plate lifting: Electric motor is used to drive lifting, stainless steel screw, pulley guide rail supplemented by lock nut lifting device

4. Water tank frame: MIL STD 810 Test Chamber,SUS304 stainless steel, waterproof and anti-corrosion;

5. Water tank lifting guide rail: formed guide rail, pulley guide wheel.