IEC 62660-2 Salt Spray Test Equipment NSS Aging Electronics

Description

IEC 62660-2 NSS aging electronics salt spray test equipment  is used to assess the anti-corrosion ability of materials and their protective layers, as well as the process quality comparison of similar protective layers. It can also be used to assess the salt spray corrosion resistance of certain products.

Products Parameters

Advantage

In practical use of electronic products will encounter rain, salt water erosion, resulting in the fading of electronic products, corrosion, aging, etc. ,

LIB INDUSTRY specializes in the production of testing the performance of electronic products salt fog chamber, suitable for factories, manufacturers, laboratories, university research.

Salt Test Equipment Details

Test Requirements

1. The temperature in the salt spray test chamber is 35±2 degrees C;

2. At any location in the salt spray test equipment, a continuous zeroing of 16h of salt mist settlement is collected with a funnel with an area of 80cm, with an average of 1.0-2.0 ml of solution collected per hour;

3. The salt spray test equipment can be sprayed evenly, not affected by the test sample, the salt mist shall not be sprayed directly onto the test sample, the top and inner wall of the salt mist test chamber, and other parts of the condensate shall not drip on the test sample, and the air pressure inside and outside the salt mist test chamber must be balanced