1220ltr IEC61646 Temperature Humidity Chamber Temperature Change Test Chamber

IEC and UL Tests

IEC61646 85℃ PV Panel Temperature Change Tets Chamber

All of the IEC 61215 & 61646 PV environmental tests chamber are used for can be done in the same test chamber.

It may be better, however, to consider multiple chambers to save time and electricity due to the lengths of the tests:

•The temperature cycling test may last up to seven weeks.

•The damp heat test is six weeks long.

•The damp heat test requires only minimal refrigeration,reducing capital and energ costs if a dedicated model is selected for this test.

Technical Specification

Test Cycle

IEC61646 85℃ PV Panel Temperature Change Tets Chamber

◆Thermal Cycle Test

Requires temperature cycling between 85°C and -40°C,

50 or 200 times.

◆Humidity Freeze Test

Cycling between hot/humid 85°C/85%RH and subfreezing -40°C ten times, with extended soaks at 85/85.

◆Damp Heat Test

A long term, 1,000 hour, test at 85°C/85%.

Feature

IEC61646 85℃ PV Panel Temperature Change Tets Chamber

The models come in different performance versions,depending on your planned use (customizable).

More powerful performance allows you to complete the temperaturecycling test faster, or with a maximum number of modules.

• Stainless steel exterior & interior

• Viewing window

•Touch-screen programmer/controller

• Product temperature control mode option for easier IEC & UL test compliance

•Cable port for testing panels in-place

•Optional module rack with rollers

Contact us for a quotation!