50~98% RH ARC Xenon Test Chamber 280nm~800nm Xenon Tester

Name

50~98% RH ARC Xenon Test Chamber 280nm~800nm Xenon Tester

Model

XL-750

Internal dimensions D*W*H

950*950*850 mm

Overall dimensions D*W*H

1300*1420*1800 mm

Specimen Capacity

42pcs

Specimen holder size

95*200mm

Irradiation Source

1 piece of 6500 W water-cooled xenon lamp with inner quartz and outer borosilicate filter

Irradiance Range

100~1200 W/㎡

Bandwidth Measurement

280nm~800nm

Chamber Temperature Range

Ambient ~100℃±2°C

Black Panel Temperature

BPT 35 ~85℃±2°C

Relative Humidity Range

50~98% R.H±5% RH

Water Spray cycle

1～9999H59M, adjustable

Controller

programmable color display touch screen controller, PC Link, R-232 interface

Radiometer

Tolerance: ±5%

Heating system

Nichrome heater

Cooling system

Mechanical compression refrigeration system

Refrigerating unit

French TECUMSEH compressor

Humidification system

External isolation, stainless steel surface evaporation humidifier

Air circulation

Centrifugal wind fan

Water supply system

Automatic water supply; Water purification system

Interior material

SUS304 stainless steel

Exterior material

Steel Plate with protective coating

Thermal insulation

Polyurethane foam

Observation window

Interior lighting , double-layer thermo stability silicone rubber sealing

Power Supply

AC380V 50HZ

Viewing Window
Double layer insulating glass 8cm thickness, made of tempered glass.
The conductive film is located on the interior glass to prevent window frosting, built-in LED light for the work room lighting ;can clearly observe samples.
The light control button is located below the controller.

Rotating Specimen Holder
Inside there is a rotating specimen holder, which rotates around the xenon lamp,so that the irradiance received by the specimen is relatively uniform during the test. Total can mount 42 pieces of specimen.

Black Panel Thermometer
The blackboard thermometer is composed of a stainless steel flat plate with a length of 150 mm, a width of 70 mm, and a thickness of 1 mm. The side of the board facing the light source should be coated with a black flat lacquer to absorb at least 90% of the total incidence

Water Re-circulation
Water purifier: mainly purification from water source to water tank.
Water re-circulation system that reduced water use and a series of water pipes