380V 50Hz Ip Ingress Protection Test Equipment 65dBA Maximum Noise ISO17025

Ip 68 Test Chamber Ip Testing Equipment For Iec 60529 Testing Procedures

♦ Product Description of Ip 68 Test Chamber

Ip 68 Test Chamber Ip Testing Equipment For Iec 60529 Testing Procedures.Devices backed by an international standard rating of IP68 are deemed fit enough to withstand dust, dirt and sand, and are resistant to submersion up to a maximum depth of 1.5m underwater for up to thirty minutes.
The IP Code, International Protection Marking, IEC 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures

♦ Advantages of Ip 68 Test Chamber

1. IEC60529, ISO20653 standard performed

2. Internal illumination in the test room

3. Viewing window with wiper

4. Build-in power interface and vacuum system for specimens

5. USB and Ethernet

6. CE mark

7. Dust blowing through the special wind tunnel and air outlet

8. Multi-language interface

♦ Parameter of Ip 68 Test Chamber

♦ Application of Ip 68 Test Chamber

Ip 68 Test Chamber Ip Testing Equipment For Iec 60529 Testing Procedures is suitable for testing the sealing performance of the shell of the product. It is mainly used for the test of the two grades of IP5X and IP6X specified in the p
rotection standard of the shell. It is mainly to simulate sandstorm weather caused damage to lockset, auto parts, seals, electrical instruments and other products. Through the test, add some protective screening or sand and dust measures in the general equipment installation and application. Improve the product’s ability to resist and protect dust.

The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects. The test depth and duration is expected to be greater than the requirements for IPx7, and other environmental effects may be added, such as temperature cycling before immersion.

♦ The structures of Ip 68 Test Chamber

♦ How to service

1. At first, our test chambers are produced based on 20 years product lifetime.

2. If the customer needs our engineer on-site service, they only need to pay the ticket accommodation to our Engineers, service is for free.

3. If products still can't use after our engineers' repair, we will produce a new test chamber (same as the old one) to our customers with no charge.

♦ Packaging and Shipping

1. Seal chamber with waterproof plastic film. Protect chamber from seawater corrosion.

2. Buffer foam is placed in the four corners of the chamber.

3.Standard wood export packaging.

   Gross weight: 600kgs~

   Package size: 2100*1400*2300 mm

It can be used for Sea, Air, Railway, Truck, and multimodal transport.

► Other products

Our main products included temperature and humidity test chambers, Corrosion salt chambers, Accelerated weathering chambers, IP dust&rain chambers, Ozone test chamber, Noxious gas SO2 H2S chambers.