1000L 1500L Ingress Protection Sand And Dust Test Chamber Easy To Operate

1000L 1500L Ingress Protection Sand Dust Stability Test Equipment

Description of Sand Dust Test Equipment

1000L 1500L Ingress Protection Sand Dust Stability Test Equipment is designed for sealing performance test and reliability test, widely used in electrical, electronics, automobile, motorcycle, LED and other products. It is suitable for the work ability test on the shell sealing performance, product in dust free settlement, in the environment without apparent air flow or with a strong blast air and a large amount of sand dust, and similar condition.

1000L 1500L Ingress Protection Sand Dust Stability Test Equipment is designed and manufactured according to IEC60529, "Shell Protection Grade (IP Code)", which is suitable for sand and dust test of electrical products with the first characteristic digits of 5 and 6 (IPX5 and IPX6).

Structure and Material

1.Material:Interior material SUS304 stainless steel,Exterior material Steel Plate with protective coating

2.Sample outlet: dust-proof socket

3.Controller: programmable controller (the controller has the following arbitrary setting control functions).

A. Dust blowing time (stop and blow) h/m/s adjustable

B. Cycle: arbitrary adjustable

C. Preset test time: 0s to 999h99m99s arbitrary adjustable

D. Power on: break through break

4.Metal screen size: nominal diameter 50 um, nominal distance between lines 75 um

5.Blower: Enclosed alloy low-noise motor, multi-vane centrifugal fan

6.Vacuum system: equipped with pressure gauge, air filter,
 

Main Technical Parameter of Sand Dust Test Equipment

​Standards of Sand Dust Test Equipment

IEC 60529

ISO 20653

MIL-STD-810F-510

MIL-STD-810G

Key Features of Sand Dust Test Equipment

*Larger capacity of 1500 liters and 2000 liters.

*Standard and custom.

*Suitable for large and more quantity products

*Dust blowing through special wind tunnel and air outlet

*Constant dust concentration

*2 viewing windows with wipers

*2 doors with tight seal

*Programmable color LCD touch screen controller

*USB and Ethernet

*Strong stainless steel specimen shelves

*Build -in power interface and vacuum system for specimens

*Internal illumination in test room

*Reliable performance

*Safety protection system

*CE mark, ISO17025 calibration

*Easy to operate

*Dust collection section is located on bottom of test chamber.

*A heater fixed into test chamber to keep dust dry.A viewing window with a manually controlled wiper.

*The air velocity for the blowing of dust is controlled by a dust blowing mechanism that includes a motor and blower combination

Structure characteristics

• Equipment structure takes up stainless steel plate plus (41090) power for hull painting. It not only has good profile, but also has fine corrosion resistance.
• It has advanced and innovative control theory, it integrates three control systems of PLC, HMI and SOC in fine way. Control is correct by 100%, and you can experience the novel control feeling;
• It utilizes most powerful and reliable PLC and special modules in the industry circle. 50 programs and 2500 steps are provided for user to make setting/storage and running;
• It utilizes protection module for safe voltage, the withstand voltage can reach 500V. After energizing the equipment, the equipment will not be burned and it can protect the equipment by 100%.
• It has automatic safety protection switch, which has high sensitivity, can detect any state, cut off protection and give alarm in shortest time and assure safety of the personnel and equipment;
• It has air supply and circulating system, which can avoid dead angle of air flow in the chamber and improve the uniformity degree of product temperature and humidity.

LIB Service 

Other Products

Contact us now,Attach 2 kg of talcum powder!